86-755-36607322
7th Floor, Building G, Weiye Innovation Industrial Park, Hangcheng Road, Gushu, Xixiang Street, Baoan Dist., Shenzhen, Guangdong, China (Mainland)
PM2.5+TVOC Air Quality Monitor
1.Product Introduction
Good air quality is very important to people's health. However, due to many reasons, such as furniture, interior decoration, cosmetic, office equipment, chemical, living environment, air quality has seriously affected to the health of family members. This product is a powerful and high accuracy product. It can monitor air quality with full range and full time so that people can protect the family health through monitoring air quality information.
2.Functions & Features
1)Can measure TVOC levels accurately. Not one or several pollutants in air only, there are a variety of pollutants. This product adopts ultra high performance air quality sensor from Germany. It can detect not only unburned hydrocarbons but also carbon monoxide. It can detect many pollutants such as formaldehyde, acetaldehyde,methane, benzene, methylbenzene, dimethylbenzene, styrene, phenol, paraffin hydrocarbon, alkanes, ethanol, acetone, isoprene, etc. It can calculate chemical pollutants in air synthetically.
2)Can directly show air quality through five levels (Excellent, Good, Normal, Poor, Bad)which is more easy to understand. It is not air pollution index which ordinary peopleare not familiar also is not face icon.
3)Accuracy of 0.01mg/m3 for TVOC sufficiently meets the requirement for family use.
4)Can measure air temperature, resolution up to 0.1 ℃.
5)Can measure air humidity, resolution up to 0.1%RH.
6)Can show dust concentration in the air, resolution up to 1µg/m3.
7)Large screen: visual size up to 96 mm X 53 mm.
8)When the air quality is problem (factory setting is Poor, 0.60 mg/m3 for TVOC,75µg/m3 for PM2.5), the detector will alarm. User can set the data for alarm according to his requirements. This fully meets user’s requirement for air quality.
9)Can toggle display mode for temperature in Celsius and Fahrenheit. This is more able to meet a variety of customer use.
3.Operation
1)Power ON/OFF: plug adapter into socket, press Power key around 2 seconds, it will power on. It will power off if it already power on. Adapter will supply power if adapter and battery are used at the same time.
After power on, the air quality monitor starts to work automatically.
2)Steps for Set :
a)Press Set key, the cursor will go to PM2.5 alarm data setting. Press to set digit that you want with pressing Set key to move cursor.
b)Press Set key again, the cursor will go to TVOC alarm data setting. Press to setdigit that you want with pressing Set key to move cursor.
c)Press Set key, the cursor will go to ℃ icon automatically. Press key if need to change to ℉ icon.
d)If finish the setting, press OK key to confirm and exit. All data will be recorded automatically.
3)Alarm key
a)Press Alarm key, buzzer icon will appear with the state of Alarm. Press Alarm key again, buzzer icon will disappear without the state of Alarm.
b)In the state of Alarm, the buzzer will alarm if the air quality is out of data which is set by user. Press Alarm key, the buzzer stops to alarm and the icon disappear.
4.Structure Description
5.Specifications
1)Air quality sensor
2)PM2.5 sensor
3)Temperature
4)Humidity
5)Product specification
6.Attention
1)In order to measure air quality accurately, the time of warm up after power on is 5 minutes. It displays 0.22 mg/m3 during the time.
2)When the air quality is better than 0.22 mg/m3, it displays 0.22 mg/m3.
3) The back light is on when touching keys and off automatically after 10 minutes if no key is pressed.
